Search Results

IntroductionSelection Guide Engineering DataBrochure

Laminated Phenolic-Backed
Phenolic-backed FIBERGLIDE® thrust bearings provide high load capacity and low friction for use where the elimination of lubrication is desirable. Typical applications include industrial valves and valve actuators, vehicle kingpin assemblies and marine drives.

Non-metallic and hence non-corrosive, these FIBERGLIDE® thrust bearings are lightweight and are fabricated of woven PFTE fibers backed by a laminated phenolic resin system. Double sided construction extends bearing life. It is important that mating surfaces be smooth and free from sharp edges.

Maximum compressive is 10,000 psi, with operating temprature range of -250 F to 200 F. Friction coefficients as low as 0.03 with added lubricants are obtainable. For bearing installation, click here.

Part Number Maximum
Shaft
Diameter
A B T
LTD0408 0.250 0.280 0.500 0.031
LTD0510 0.312 0.344 0.625 0.031
LTD0612 0.375 0.406 0.750 0.031
LTD0714 0.437 0.468 0.875 0.031
LTD0816 0.500 0.531 1.000 0.031
LTD0918 0.562 0.593 1.125 0.063
LTD1020 0.625 0.656 1.250 0.063
LTD1122 0.687 0.718 1.375 0.063
LTD1224 0.75 0.781 1.500 0.063
LTD1326 0.812 0.843 1.625 0.063
LTD1428 0.875 0.906 1.750 0.063
LTD1530 0.937 0.968 1.875 0.063
LTD1632 1.000 1.031 2.000 0.063
LTD1834 1.125 1.156 2.125 0.063
LTD2036 1.250 1.281 2.250 0.063
LTD2240 1.375 1.406 2.500 0.063
LTD2442 1.500 1.531 2.625 0.094
LTD2644 1.625 1.656 2.750 0.094
LTD2846 1.750 1.781 2.875 0.094
LTD3048 1.875 1.906 3.000 0.094
LTD3252 2.000 2.062 3.250 0.094
LTD3654 2.250 2.312 3.375 0.094
LTD4060 2.500 2.562 3.750 0.094
LTD4466 2.750 2.812 4.125 0.094
LTD4872 3.000 3.062 4.500 0.094
LTD5278 3.250 3.312 4.875 0.094