Search Results

IntroductionSelection Guide Engineering DataBrochure

Metal-Backed
FIBERGLIDE® FTS series thrust bearings offer an economical approach to obtaining self-lubrication where high loads are encountered. They are comprised of zinc-plated mild steel with woven PFTE laminated to one face. These bearings are recommended for use as an alternate to LTD washers in applications where metal backing is preferred.

Maximum compressive strength is 30,000 psi, with operating temperature range of -320°F to 300°F. Friction coefficients as low as 0.03 with no added lubricants are obtainable.

FABROID® Liners can also be supplied. For special applications, consult Transport Dynamics Engineering Department. These thrust bearings can also be supplied with special metals and with liners on both sides (FTD) series.

Part Number Maximum
Shaft
Diameter
ID OD Thickness
FTS0408 0.25 0.28 0.5 0.058
FTS0510 0.312 0.344 0.625 0.058
FTS0612 0.375 0.406 0.75 0.058
FTS0714 0.437 0.468 0.875 0.058
FTS0816 0.5 0.531 1 0.058
FTS0918 0.562 0.593 1.125 0.058
FTS1020 0.625 0.656 1.25 0.058
FTS1122 0.687 0.718 1.375 0.058
FTS1224 0.75 0.781 1.5 0.058
FTS1326 0.812 0.843 1.625 0.058
FTS1428 0.875 0.906 1.75 0.058
FTS1530 0.937 0.968 1.875 0.058
FTS1632 1 1.031 2 0.058
FTS1834 1.125 1.156 2.125 0.058
FTS2036 1.25 1.281 2.25 0.058
FTS2240 1.375 1.406 2.5 0.058
FTS2442 1.5 1.531 2.625 0.058
FTS2644 1.625 1.656 2.75 0.058
FTS2846 1.75 1.781 2.875 0.058
FTS3048 1.875 1.906 3 0.058
FTS3252 2 2.062 3.25 0.058
FTS3654 2.25 2.312 3.375 0.058
FTS4060 2.5 2.562 3.75 0.058
FTS4466 2.75 2.812 4.125 0.058
FTS4872 3 3.062 4.5 0.058
FTS5278 3.25 3.312 4.875 0.058